Car Electronics & GPS Systems

AT A GLANCE

• 2 to 4 way design for extreme full range quality hitting all the right frequencies.
• Rubber surrounds with treated paper cones for great volume and sensitivity to power ratio.
• included grills to protect your speakers as well as great looks to blend in to any vehicle.

AT A GLANCE

• High Temperature Voice Coil
• Injected Molded
• 2-Layer Copper Voice Coil
• Wide Frequency Response
• Exceptional 200W Power

AT A GLANCE

• 1" polypropylene dome tweeters (pair)
• Flush- and surface-mount hardware included
• External crossovers included
• Handles up to 50 watts RMS (100 watts peak power)
• Frequency response: 3200-20,000 Hz
• Sensitivity: 87 dB
• Top-mount depth: 7/8"

AT A GLANCE

• 5.25" 2-Way Speakers (pair)
• Polypropylene Woofer Cone with Polyurethane Surround
• 60 Watts Peak Power
• 30 Watts RMS
• PEI Dome Tweeter
• Sensitivity: 87 dB
• Frequency Response: 110Hz - 20kHz
• Cutout Diameter: 4-1/2"
• Top-Mount Depth: 2-1/4"
• Grilles Included

AT A GLANCE

• 7" 2-Way Car Speakers (Pair)
• 1" dome tweeter
• 87 dB
• Peak Power 240W
• 4 Ohms Impedance
• Frequency Response 63 - 17k Hz
• Rubber Woofer Surround

AT A GLANCE

• 6 1/2" Round 2-Way Car Speakers (Pair)
• 240 Watts Peak Power
• 80 Watts RMS Power
• Impedance: 4 Ohms
• Injection P.P. Cone Woofer
• Multi-Use Bracket Included

AT A GLANCE

• 2-way car speakers (pair)
• 6"x8" Injection Molded Polypropylene
• 1" polyester soft dome tweeter
• 2-Way Design

AT A GLANCE

• 210 Watts Max. Power
• Injected Molded Polypropylene™ (IMPP) composite Cone Woofer
• Patented Pioneer P.F.S.S Spider
• 1-3/16" Balanced Dome Tweeter

AT A GLANCE

• 6.5” 4 Ohm 2-Way Marine / Motorsports Speakers
• Waterproof Polypropylene Cone
• Rubber Surround
• Balanced Dome Tweeter
• UV Resistant Grille
• 30W RMS, 60W Max Power
• Sensitivity 87dB/W at 1m
• Frequency Response 60Hz - 20,000Hz
• Cutout Diameter 5”
• Mounting Depth 2-5/16”

AT A GLANCE

• 320 Watts Max Power (70 Watts Nominal)
• 11mm Tweeter
• 1-5/8" cellulose fiber cone midrange
• 6-1/2" carbon and mica reinforced Injection Molded Polypropylene (IMPP) cone construction

AT A GLANCE

• 2 to 4 way design for extreme full range quality hitting all the right frequencies.
• Rubber surrounds with treated paper cones for great volume and sensitivity to power ratio.
• included grills to protect your speakers as well as great looks to blend in to any vehicle.