Car Audio

AT A GLANCE

• Plus One™ Woofer Cones
• Convertible Design
• Perimeter Illumination
• SSI (Switch-Selectable Impedance)
• Mylar Tweeters with Integrated Grilles
• One-piece Polymer basket
• High Sensitivity
• Voicing of Speakers
• Harman Standard Reliability Testing

AT A GLANCE

• Included Remote Control
• Adjustable Low-Pass Crossover
• Easy Install
• Two Auto-On Options

AT A GLANCE

• 4-Ohm
• 750 Peak Power Watts
• Recommended Amplifier Power 180-375 Watts RMS
• Dual Voice Coil Design

AT A GLANCE

• Size (IN.,CM): 10, 25.0
• Impedance (OHMS): 4 SVC
• Max Rec Amplifier Power (WATTS PEAK/RMS)*: 300/150
• Sensitivity (dB 1w/1m): 86.2
• Frequency Response (Hz): 30-500
  
  *Assumes typical music program with minimal amplifier clipping; varies with enclosure size. See your KICKER dealer for details.

AT A GLANCE

• 350 Watt RMS Power
• 700 Watt Peak Power
• 84 dB
• 2 Voice Coils
• Selectable Voice Coil

AT A GLANCE

• 300 RMS Power
• 600 Peak Power
• Polypropylene Cone and Rubber Surround
• Progressive Poly Cotton Spider
• Anodized Aluminum Voice Coil Former

AT A GLANCE

• Compact Factory-Tuned Enclosure
• 400 Watt Built-In Amp
• Thick, Touch Internal Bracing to Resist Stacking Weight
• Remote Bass Control

AT A GLANCE

• Plus One™ Woofer Cones
• Convertible Design
• Perimeter Illumination
• SSI (Switch-Selectable Impedance)
• Mylar Tweeters with Integrated Grilles
• One-piece Polymer basket
• High Sensitivity
• Harman Standard Reliability Testing

AT A GLANCE

• 350 Watts Peak Power
• 175 Watts RMS
• 4-Ohm Voice Coil
• Sensitivity: 88.1 dB
• Frequency Response: 30Hz - 500Hz
• Injection-Molded Polypropylene Cone
• Co-molded Santoprene® Surround
• UniPlate™ Back Plate And Pole Piece
• Thick Tinsel Leads
• Large Ceramic Magnet
• Rear Gasketing Included
• Polymer Basket Resists Corrosion
• Protective Terminal Cap
• Stainless Mounting Hardware Included

AT A GLANCE

• 10" subwoofer with dual 4-ohm voice coils
• injection-molded polypropylene cone
• ribbed Santoprene rubber surround
• power handling: 50-400 watts RMS (200 watts per coil)
• 800 watts peak power handling
• frequency response: 25-500 Hz
• sensitivity: 83.6 dB
• top-mount depth: 5-1/2"
• sealed box volume: 0.8-3.0 cu. ft.
• ported box volume: 1.25-1.75 cu. ft.

AT A GLANCE

• 10" 2-ohm subwoofer
• Injection-molded polypropylene cone with Santoprene rubber surround
• Power handling: 400 watts RMS
• Peak power handling: 800 watts
• Sensitivity: 87.2 dB
• Top-mount depth: 4-1/4"
• Sealed box volume: 0.8 - 3.0 cu. ft.
• Ported box volume: 1.25 - 1.75 cu. ft.

AT A GLANCE

• Versatility in Your System
• 10" Component Subwoofer
• Power Handling: 300 Watts RMS (600 Watts Peak)
• Compression Terminals Handle Up to 12-Gauge Wire

AT A GLANCE

• 10" component subwoofer
• selectable 1- or 2-ohm impedance
• reinforced pressed paper cone with polypropylene dustcap
• double-stitched rubber surround
• cast aluminum basket and 120-ounce magnet
• 2.5-ohm triple voice coils
• power handling: 750 watts RMS (1500 watts peak)
• frequency response: 35-150 Hz

AT A GLANCE

• Sealed downward-firing enclosure with one 10" CompVT subwoofer
• 3/4" medium-density fiberboard construction covered with carpet
• 2-ohm total impedance
• Power handling: 350 watts RMS (700 watts peak)
• Sensitivity: 96.5 dB
• Dimensions: 19.13"W x 6.38"H x 13.31"D

AT A GLANCE

• 12 AWG compression terminals
• Anodized aluminum voice coil former
• Optimized for sealed or ported enclosures
• Sub cone design for greater efficiency
• Polypropylene cone for improved durability
• Progressive poly cotton spider for controlled motion resulting in lower distortion
• Rubber surround for improved durability
• Perfect fit for SAPE Enclosures