Skip to main content
Denon PMA600NE view 1
Denon 90W Stereo Integrated Amplifier
EE Model #: PMA600NE
Manufacturer Model #: PMA600NE

Denon 90W Stereo Integrated Amplifier

EE Model #: PMA600NE
Manufacturer Model #: PMA600NE


Unavailable Online

No Store SelectedSELECT

Not Available In Store

Delivery Options to 20147


Out of Stock

At a Glance

  • 45 watts x 2 channels into 8 ohms (20-20,000 Hz) at 0.07% THD
  • 70 watts x 2 into 4 ohms
  • built-in Bluetooth® for convenient music streaming
  • 24-bit/192kHz digital-to-analog converter for high-performance playback of digitally connected sources such as network music players or CD players
  • built-in phono preamp compatible with moving magnet cartridges
  • Analog Mode disables digital circuitry for better sound with analog sources
  • Advanced High Current (AHC) single push-pull circuit power amplifier
  • Stop Mode deactivates the microprocessor when it's not in use for a lower noise floor
  • front-panel tone controls (treble and bass)
  • built-in headphone amplifier with full-size (1/4-inch) jack
  • remote control included
  • signal-to-noise ratio: 105 dB (line in), 84 dB (moving magnet)

What's in the Box

  • Integrated amplifier
  • Remote control (RC-1234)
  • Two "AAA" batteries
  • Owner's Manual on CD-ROM
  • Quick Start Guide
  • Safety Instructions
  • Warranty Information
  • Bluetooth correction note

Expert Sales Advice

Have a question? Get an answer from one of our experts.
See availability »

Live Chat | 615-346-1419 | Email Us
Denon PMA600NE view 1
Denon PMA600NE view 2
Denon PMA600NE view 3
Denon PMA600NE view 4
Denon PMA600NE view 1
Denon PMA600NE view 2
Denon PMA600NE view 3
Denon PMA600NE view 4

Product Description

Enjoy high-resolution stereo sound with your speakers and the Denon PMA-600NE 90W Stereo Integrated Amplifier. It outputs up to 45W per channel at 8 Ohms and features an SLDC chassis design to help isolate the internal components to minimize interference. It allows you to input digital audio signals via digital coaxial and two optical inputs. Four stereo RCA inputs let you connect analog devices, and the MM phono input enables connectivity with a variety of record players. The PMA-600NE includes a remote control as an added convenience.

Up to 70W per Channel

The PMA-600NE delivers up to 70W of power per channel (@ 4 ohms, 1 kHz, 0.7% THD; 45W per channel @ 8 ohms, 20 Hz to 20 kHz, 0.07% THD), and with 4 to 16 ohm speaker compatibility, can be used with a wide range of speaker types.

Bluetooth, Optical, and Digital Coaxial Connectivity

Pair the PMA-600NE with your smart device or computer via Bluetooth to enjoy your favorite music wirelessly. You can also connect your TV, media player, computer, or any digital source via the digital coaxial and two optical inputs. Each support PCM signals up to 192 kHz / 24-bit with a built-in DAC.

Advanced High Current (AHC) Single Push-Pull Circuit

The PMA-600NE features AHC (Advanced High Current) transistors designed to support a higher electrical current supply capacity than conventional audio power transistors.

Up to 100 kHz Frequency Response

The amplifier circuit is engineered to secure a frequency response of up to 100 kHz, while the volume circuit suppresses noise in the amplifier for enhanced sonic resolution, enabling the PMA-600NE to handle a variety of high-resolution audio sources with tone control and power throughout. Balance, bass, and treble adjustment let you fine-tune the audio output.

Analog Mode

This mode allows the amplifier to operate as a purely analog amp, disabling the digital inputs and Bluetooth receiver while you listen to an analog source. Enable this mode to cut power to the dedicated digital power source, preventing any high-frequency influence on the analog section for enhanced clarity and detail. Additionally, the Source Direct function takes advantage of short signal paths for augmented sound purity.

MM Phono Equalizer

The PMA-600NE includes a phono equalizer that supports input from MM cartridges. This phono equalizer is designed for high gain, and as loops in the circuit board pattern can cause adverse effects on sound quality, the straightforward design helps mitigate these effects.

Main Transformer with Individual Wiring

To reduce interference and maintain sound quality, the main power transformer of the PMA-600NE has separate coiled wires for the audio and control circuits.

Micro-Processor Stop Mode

The micro-processor of the PMA-600NE features a Stop Mode that automatically ceases all operations of the micro-processor when it's not needed for playback. By stopping the oscillation of the micro-processor clock during these listening moments, the audio signal is protected from external noise, further augmenting sound quality.

Signal Level Divided Construction (SLDC)

The Signal Level Divided Construction (SLDC) chassis is used in the audio circuit to help ensure that delicate musical signals are faithfully amplified and transmitted to the speakers.

Similar Best Sellers

Product Specifications


Dimensions (WHD):
17.1 x 4.76 x 12.1"

RMS Power Output (Watts):

Peak Power Output (Watts):

RCA Audio (In/Out):

USB Interface:

Digital Inputs (optical / coaxial):

THD (%):

Impedance (Ohms):
4 to 16 Ohms

Headphone Jack:

Weight (lbs.):
15 lbs

3 Years

Bluetooth Compatible:

Manufacturer's Description

Product Reviews