AT A GLANCE

• 3.5", woven-composite, low-frequency transducer
• 1" (25 mm), ultra-low-mass, silk-dome, high-frequency transducer
• Fast, reliable, stereo Bluetooth® 5.0 wireless input
• 50W (25W/side) Class AB amplification

AT A GLANCE

• Usb port retention cable
• For 2012-up Toyota and Lexus vehicles
• Retains the use of the OEM USB port when replacing the factory radio
• Simple installation

AT A GLANCE

• 5.25" woven-composite, low-frequency driver
• 1" ultra-low mass, silk-dome, high-frequency driver
• Fast, reliable stereo Bluetooth® 5.0 wireless input
• 100W, Class D dual amplification

AT A GLANCE

• 4.5" woven-composite, low-frequency driver
• 1" ultra-low mass, silk-dome, high-frequency driver
• Fast, reliable stereo Bluetooth® 5.0 wireless input
• 50W, Class AB dual amplification

AT A GLANCE

• Radio Replacement Interface for Select non-amplified Class II GM vehicles with 24-pin connector
• Retains all safety warning chimes when the factory radio is replaced
• Provides 10-minute RAP accessory output
• Interface can be quickly updated if needed from PAC website using PAC-UP USB adapter
• Retains all safety warning chimes when the factory radio is replaced
• Provides 10-minute rap accessory output
• 24-Pin connector

AT A GLANCE

• Universal Steering Wheel Control Interface
• Plug and Play installation
• Works with Nearly All Popular Aftermarket Receivers
• Provides Conguration Information for Dip Switch or Direct Flash from PC APP

AT A GLANCE

• 8-Pin USB port retention cable
• For 2011-up Nissan cube, juke and versa vehicles
• Retains the use of the OEM USB port when replacing the factory radio
• Simple installation

AT A GLANCE

• Retains steering wheel controls (pre-programmed)
• Data controlled accessory and navigation outputs
• Retains factory amplifier
• Factory RSE activation
• 12V ACC output (RAP)
• Vehicle Speed Sense (VSS)
• Illumination, reverse and parking brake outputs
• Antenna Adapter included
• Factory USB port retention cable included

AT A GLANCE

• OnStar retention
• Steering wheel control retention
• Warning chime module included
• Bose amplifier retention (Standard and Premium)
• Rear-seat entertainment system retention (GMRVD required)
• Retains factory Bluetooth (2009+ model vehicles)
• In-field firmware updatable (PAC-UP required)
• Antenna Adapter included
• Factory USB port retention cable included
• Dual Zone function
• Retains back-up sensors/park assist and back up camera signal
• Retains rear seat audio controls
• Retains factory satellite radio with text displayed in the Driver Information Center (cluster display)

AT A GLANCE

• Radio Replacement Interface for Select 2005-up MSCAN-bus Ford, Lincoln and Mercury Vehicles
• Enables factory features such as rear seat entertainment, rear controls, and the THXII amp when the factory radio is replaced
• Provides RAP accessory power output, vehicle speed, illumination, reverse indication output and parking brake output signal to allow easy installation of an aftermarket NAV system
• Compatible with THX, SONY, Shaker and Audiophile sound systems in applicable vehicles. (v1.1.4 or higher required)

AT A GLANCE

• OnStar retention
• Warning chimes through sound system or external speaker
• Bose amplifier retention (Standard & Premium)
• Premium Bose amplfier adjustments (gain, bass, mid, treble)
• Real-time audio fade
• Rear-seat entertainment system retention
• USB updatable

AT A GLANCE

• Warning chimes through internal speaker
• Bose amplifier retention (Standard & Premium)
• SWI-DIRECT add-on steering wheel control interface connection
• Time saving streamlined harness design and small housing
• USB updatable

AT A GLANCE

• Keeps steering wheel controls
• Warning chimes through external speaker
• Bose amplifier retention (Standard & Premium)
• Audio fade setting through application
• Rear-seat entertainment system retention
• Time saving streamlined harness design and small housing
• USB updatable

AT A GLANCE

• Retains Use Of OEM Sub Port
• For Installation of Aftermarket Radio
• For Select GM and Chrysler Vehicles
• Durable Construction

AT A GLANCE

• Usb port retention cable
• For 2009-up Hyundai/Kia vehicles
• Retains the use of the OEM USB port when replacing the factory radio
• Simple installation

AT A GLANCE

• Single wire output for steering wheel control module
• Retains all safety warning chimes
• Plug and play interface
• Made for GM Vehicles 2004 and Up w/out Onstar

AT A GLANCE

• Retains steering wheel controls (pre-programmed)
• Data controlled accessory and navigation outputs
• Retains factory amplifier (standard & premium)
• Retains Rear Seat Controls (most vehicles)
• Provides factory RSE activation
• In package updatable using the PAC-UP

AT A GLANCE

• Rear Seat Entertainment activation
• No Steering Wheel Button mapping required
• Retains OnStar when the factory radio is replaced
• Rear seat entertainment activation

AT A GLANCE

• Oem USB port retention cable for Subaru vehicles
• 2013 - 2014 Subaru BRZ
• 2012 - 2014 Subaru Impreza
• 2010 - 2014 Subaru outback
• Radio replacement cable

AT A GLANCE

• Install an aftermarket single-DIN (2" tall) or double-DIN (4" tall) car stereo.
• For 2015 to current Ford Trucks
• Installation Dash Kit for Single or Double DIN Head units
• Includes a storage pocket below the radio for single din mounting
• Gapless fit between the dash and the kit
• Painted to match factory dash color
• Factory matched texture style
• High-grade ABS plastic construction

AT A GLANCE

• Radio Replacement Interface For Select GM Vehicles Without On-Star
• High current 10A accessory output
• Data controlled outputs for connecting to your navigation radio; speed, reverse and E-brake status output wires
• Retains factory installed amplifier
• Data controlled RAP accessory output

AT A GLANCE

• Steering wheel controls (SWC)
• 3.5mm auxiliary audio input
• JBL and JBL Synthesis amplified audio systems
• On-board 10 amp ACC 12 Volt output

AT A GLANCE

• Replacement interface harness for select Chrysler vehicles with CAN Bus
• Compatible with amplified or non-amplified systems
• Retain Accessory Power (RAP) 12V Output
• VSS, illumination, parking brake and reverse trigger output

AT A GLANCE

• Designed for 2001-2016 Toyota, Lexus, and Scion vehicle models
• Retains SWC and Compatibility with JBL amplified Systems
• Built in 3.5mm audio jack and USB
• Easy Installation