AT A GLANCE

• PBM Series Special Edition PBM-400.1 Amplifier
• Remote Gain Control
• Protective Mesh Grills 
• ATK-8C 8AWG Wire Kit
• Heavy Duty Dual 12" Box Design
• Computer Optimized Acoustic Chamber
• Bass Reflex Aero/Slot Port System
• 2-Layer DDC Coated Black Ribbed Paper Cone
• 2" BASV High Temperature Voice Coil
• Double Pressed Treated Foam Surround
• Black Aircraft Grade Vinyl Finish
• Single 2-ohm Input
• 800W Amp

AT A GLANCE

• 600W High Efficiency Full Range Class D Design
• 2-OHM Stereo Stable Amplifier
• Ultra Low Current Draw
• Conformal Coated PC Board
• Digital Sound Optimization Circuitry
• High Damping Control Circuit
• High Current Voltage Ripple Rejection Circuitry
• Selectable Crossover Network HPF, LPF, OFF
• Variable Low Pass Electronic Crossover
• Variable High Pass Electronic Crossover
• Variable Gain Control
• Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output.

AT A GLANCE

• PBM Series PBM-300.2 Amplifier
• Remote Gain Control
• Protective Mesh Grills 
• ATK-8C 8AWG Wire Kit
• Heavy Duty Single 12" Bass Reflex Box Design
• Computer Optimized Acoustic Chamber
• Bass Reflex Aero/Slot Port System
• 2-Layer DDC Coated Black Ribbed Paper Cone
• 2" BASV High Temperature Voice Coil
• Double Pressed Treated Foam Surround
• Black Aircraft Grade Vinyl Finish
• Single 4-ohm Input
• 600W Amp

AT A GLANCE

• Dual Flat Piston Subwoofers
• 12" Total Driver Surface Area
• Dual 6” Oval Injection Molded PP Cone Woofers
• High And Low Level Input
• Adjustable LPF
• Selectable Input Sensitivity for use with OEM integration
• Auto Turn-On Circuit with High Level Inputs
• RCA Input optional
• Remote Gain Control With Power Status Indicator
• Mounting Hardware Included

AT A GLANCE

• 500 Watt High Efficiency Class D Design
• 2-OHM Stable Mono Block Amplifier
• Ultra Low Current Draw
• Conformal Coated PC Board
• Digital Sound Optimization Circuitry
• High Damping Control Circuit
• Variable Subsonic Filter
• High Current Voltage Ripple Rejection Circuitry
• Variable Low Pass Electronic Crossover
• Variable 12dB Bass Boost EQ
• Variable Gain Control
• Wired Secondary Remote Gain Control Included
• Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output.

AT A GLANCE

• 6 x 9" Upgraded OEM Replacement Co-Axial Speakers
• 80 Watts RMS/160 Watts Max
• Injection Molded PP Cone
• Nylon OEM Speaker Adapter
• 1” Silk Dome Tweeter
• 20 oz. Magnet
• Factory Plug and Play Wiring Adapters
• 4-ohm System Impedance

AT A GLANCE

• 6.5" Upgraded OEM Replacement Co-Axial Speakers
• 60 Watts RMS/120 Watts Max
• Injection Molded PP Cone
• Nylon OEM Speaker Adapter
• 1” Silk Dome Tweeter
• 10 oz. Magnet
• Factory Plug and Play Wiring Adapters
• 4-ohm System Impedance

AT A GLANCE

• 6 1/2" Upgraded OEM Replacement Co-Axial Speakers
• 60 Watts RMS/120 Watts Max
• Injection Molded PP Cone
• Nylon OEM Speaker Adapter
• 1” Silk Dome Tweeter
• 20 oz. Magnet
• Factory Plug and Play Wiring Adapters
• 4-ohm System Impedance

AT A GLANCE

• Dual-cone tweeter
• 2-layer paper, DDC cone (dynamic damping coating)
• Double-pressed, UV-treated foam surround
• OEM drop-in replacement design
• EFF motor structures (efficient flux field)
• Non-resonant basket

AT A GLANCE

• 4 OHM Impedance
• 6.5" Upgraded OEM Replacement Component Speakers
• Injection Molded PP Cone
• Nylon OEM Speaker Adapter
• 3/4” Mylar Dome Tweeter
• Plug and Play Wiring Adapters

AT A GLANCE

• 60 Watts RMS/120 Watts Max
• Injection Molded PP Cone
• 10 oz. Magnet
• Nylon OEM Speaker Adapter
• 1” Inverted Titanium Dome Tweeter
• Inline Crossovers
• Factory Plug and Play Wiring Adapters
• 4-ohm System Impedance

AT A GLANCE

• vehicle-specific component speaker system includes two woofers and two tweeters
• 6"x 9" molded polypropylene woofer cone
• 2-3/4" silk dome tweeter with inline crossover
• designed to fit in select GM and Chevrolet vehicles
• vehicle-specific installation gear and wiring adapters included
• works with factory radio, aftermarket stereo, or amplifier
• handles up to 80 watts RMS (160 watts peak)
• frequency response: 65-19,000 Hz
• impedance: 4 ohms
• sensitivity: 89 dB
• woofer mounting depth: 1-1/4"

AT A GLANCE

• 4 OHM Impedance
• 6.5" Upgraded OEM Replacement Co-Axial Speakers
• 60 Watts RMS
• Injection Molded PP Cone
• Nylon OEM Speaker Adapter
• Plug and Play Wiring Adapters

AT A GLANCE

• 6x9" Upgraded OEM Replacement Co-Axial Speakers
• 80 Watts RMS/160 Watts Max
• Injection Molded PP Cone
• Nylon OEM Speaker Adapter
• 1” Silk Dome Tweeter
• 35 oz. Magnet
• Factory Plug and Play Wiring Adapters
• 4-ohm System Impedance

AT A GLANCE

• vehicle-specific component speaker system includes two woofers and two tweeters
• 6"x 9" polypropylene woofer cone
• 1" silk dome tweeter with inline crossover
• Designed to fit in select Ford / Lincoln vehicles
• vehicle-specific installation gear and wiring adapters included
• works with factory radio, aftermarket stereo, or amplifier
• handles up to 80 watts RMS (160 watts peak)
• frequency response: 65-20,000 Hz
• impedance: 4 ohms
• sensitivity: 89 dB
• woofer mounting depth: 1-13/16"

AT A GLANCE

• 6.5" Upgraded OEM Replacement Co-Axial Speakers
• 60 Watts RMS/120 Watts Max
• Injection Molded PP Cone
• Nylon OEM Speaker Adapter
• 1” Silk Dome Tweeter
• 10 oz. Magnet
• Factory Plug and Play Wiring Adapters
• 4-ohm System Impedance

AT A GLANCE

• 60 Watts RMS/120 Watts Max
• Injection Molded PP Cone
• 10 oz. Magnet
• Nylon OEM Speaker Adapter
• 1” Silk Dome Tweeter
• Inline Crossovers
• Factory Plug and Play Wiring Adapters
• 4-ohm System Impedance

AT A GLANCE

• 6 x 9" Upgraded OEM Replacement Co-Axial Speakers
• 80 Watts RMS/160 Watts Max
• Injection Molded PP Cone
• Nylon OEM Speaker Adapter
• 1” Silk Dome Tweeter
• 20 oz. Magnet
• Factory Plug and Play Wiring Adapters
• 4-ohm System Impedance

AT A GLANCE

• vehicle-specific component speaker system includes two woofers and two tweeters
• 6"x 9" molded polypropylene woofer cone
• 1" silk dome tweeter with inline crossover
• designed to fit in select Toyota, Lexus, and Scion vehicles
• works with factory radio, aftermarket stereo, or amplifier
• handles up to 80 watts RMS (160 watts peak)
• frequency response: 65-20,000 Hz
• impedance: 4 ohms
• sensitivity: 89 dB
• woofer mounting depth: 1-7/8"
• vehicle-specific installation gear and wiring adapters included
• grilles not included

AT A GLANCE

• 6.5" Upgraded OEM Replacement Co-Axial Speakers
• 60 Watts RMS/120 Watts Max
• Injection Molded PP Cone
• Nylon OEM Speaker Adapter
• 1” Silk Dome Tweeter
• 10 oz. Magnet
• Factory Plug and Play Wiring Adapters
• 4-ohm System Impedance

AT A GLANCE

• Anti-slip Layer
• Compatible with Playseat Gaming Chairs
• Quick Installation

AT A GLANCE

• Heavy Duty Dual 12" Box Design
• Computer Optimized Acoustic Chamber
• Bass Reflex Aero/Slot Port System
• 2-Layer DDC Coated Black Ribbed Paper Cone
• 2" BASV High Temperature Voice Coil Double Pressed Treated Foam Surround
• 2-Tone Aircraft Grade Vinyl Finish
• Single 4-ohm Input
• 550 Watts RMS/1,100 Watts Max

AT A GLANCE

• Made with ActiFit Material
• MotionForce Base with Rubber Feet
• Storage Pockets for Accessories
• Ideal for console gaming
• Freedom of movement
• Max Weight Capacity: 269 lbs.
• Easy Setup

AT A GLANCE

• Multi-functional TV stand suitable for all Playseat® simulators
• Race-proven extremely durable metallic gray framework
• Expandable to a 3, 5 or 7 screen setup
• Fully equipped to be ready for all future upgrades