AT A GLANCE

• Plus One™ Woofer Cones
• Convertible Design
• Perimeter Illumination
• SSI (Switch-Selectable Impedance)
• Mylar Tweeters with Integrated Grilles
• One-piece Polymer basket
• High Sensitivity
• Voicing of Speakers
• Harman Standard Reliability Testing

AT A GLANCE

• Compact footprint
• Full On-Board Protection
• Input level control
• Switchable bass EQ
• Cool industrial design

AT A GLANCE

• Class D Design
• Low Distortion
• Full On-Board Protection
• Proprietary High-Conductivity Terminals
• Compact footprint
• Sleek design
• DBO™ (Dynamic Bass Optimizer)
• Remote Bass Control

AT A GLANCE

• Plus One™ Woofer Cones
• Convertible Design
• Perimeter Illumination
• SSI (Switch-Selectable Impedance)
• Mylar Tweeters with Integrated Grilles
• One-piece Polymer basket
• High Sensitivity
• Harman Standard Reliability Testing

AT A GLANCE

• Class D Design
• Low Distortion
• Full On-Board Protection
• Proprietary High-Conductivity Terminals
• Compact footprint
• Sleek design
• DBO™ (Dynamic Bass Optimizer)
• Remote Bass Control

AT A GLANCE

• Patented Plus One™ Polypropylene Woofers
• Edge-Driven Tweeters
• True 4 Ohm Architecture
• Harman Standard Reliability Testing

AT A GLANCE

• IPx5 Rated
• Outdoor Performance
• RGB Lighting
• Marine Design
• Balanced Dome Tweeters
• Designed for the Elements
• Harman Standard Reliability Testing

AT A GLANCE

• 3.75-inch high resolution display
• RNET Platform Operating System

AT A GLANCE

The R290DS is a two-channel, two-source, 90-watt amplifier with auto-source switching. With primary and secondary audio line inputs, loop output, selectable speaker level input, and 12 V trigger input and output, the R290DS provides the power and features necessary to support today’s multiroom audio systems.

• Flexible  Dual source input with auto switching selects between primary and secondary sources
• Bridgeable  to create one channel with substantial power output
• Reliable  circuitry designed to safeguard against thermal overload and short circuits

AT A GLANCE

• The industry’s most comprehensive single chassis solution
• Acts as an Audio/Video Controller and Amplifier
• Distributes six Audio/Video sources up to six listening zones simultaneously and up to 4 A-BUS* sub-zones
• Dramatically reduce your installation time. Program this controller and not the keypads!
• Six audio/video inputs with buffered loop outputs and digital input gain controls
• Six zones with 20 Watts per channel
• Variable line outputs
• Four A-BUS Ready sub-zones, expands easily with A-KP2 Keypads
• Adjustable bass, treble, balance and loudness for each zone
• Built in IR learner and pre-programmed IR Library with thousands of IR codes
• Serial computer programming / control port / software updates
• Paging and doorbell support with audio and video inputs
• Rack-mount option 2-unit high
• Front panel RS-232, keypad port and IR eye for programming
• Front panel auxiliary A/V input with IR flasher port
• Power: 20WRMS / Ch @ 8 ohms x 12 channels
• Frequency Response: 20 Hz to 20 KHz ( +/- 1 dB )
• Total Harmonic Distortion: .01%/font>
• Signal to Noise Ratio: 89 dB min, "A" weighted
• Power Supply: 110/220V High Current Toroidal
• Approvals: ETL listed. Conforms to UL Standard UL1492 and CSA Standard C22-2 No. 1-M94 and CE
• Dimensions: 17"W x 12"D x 3.5"H (43cm x 30.5cm x 9cm)
• Weight: 18lb (8.1kg)

AT A GLANCE

The SA-ZX3 Keypad Splitter gives you greater freedom to place your keypads in more convenient locations. It allows up to three keypads to be connected to a single keypad port on a Russound multiroom system or source component.

For example, you can have three UNO keypads controlling the same zone of a CAM or CAV system, or you can have three ST2-KP keypads connected to the same port on an ST2 Smart Tuner.

The SA-ZX3 works with Russound’s RNET®, CAA, and CAS multiroom systems and ST2-Series Smart Tuners.