AT A GLANCE

• PBM Series Special Edition PBM-400.1 Amplifier
• Remote Gain Control
• Protective Mesh Grills 
• ATK-8C 8AWG Wire Kit
• Heavy Duty Dual 12" Box Design
• Computer Optimized Acoustic Chamber
• Bass Reflex Aero/Slot Port System
• 2-Layer DDC Coated Black Ribbed Paper Cone
• 2" BASV High Temperature Voice Coil
• Double Pressed Treated Foam Surround
• Black Aircraft Grade Vinyl Finish
• Single 2-ohm Input
• 800W Amp

AT A GLANCE

• PBM Series PBM-300.2 Amplifier
• Remote Gain Control
• Protective Mesh Grills 
• ATK-8C 8AWG Wire Kit
• Heavy Duty Single 12" Bass Reflex Box Design
• Computer Optimized Acoustic Chamber
• Bass Reflex Aero/Slot Port System
• 2-Layer DDC Coated Black Ribbed Paper Cone
• 2" BASV High Temperature Voice Coil
• Double Pressed Treated Foam Surround
• Black Aircraft Grade Vinyl Finish
• Single 4-ohm Input
• 600W Amp

AT A GLANCE

• Loose seat cushions
• Seats and back spring rails are cut from mixed hardwood and engineered lumber
• Stripes and patterns are match cut
• Cushions are constructed of low melt fiber wrapped over high quality foam

AT A GLANCE

• Loose seat cushions
• Seats and back spring rails are cut from mixed hardwood and engineered lumber
• Stripes and patterns are match cut
• Cushions are constructed of low melt fiber wrapped over high quality foam

AT A GLANCE

• Dual-cone tweeter
• 2-layer paper, DDC cone (dynamic damping coating)
• Double-pressed, UV-treated foam surround
• OEM drop-in replacement design
• EFF motor structures (efficient flux field)
• Non-resonant basket

AT A GLANCE

• Made of engineered wood
• Butcher block finish over replicated pine grain
• Pulls in gunmetal finish
• Center open storage area
• 2 side storage areas with cabinet doors
• 3 adjustable/removable shelves
• Cutouts for wire management
• Compatible with W100-101 and W100-02 electric fireplace inserts
• Assembly required

AT A GLANCE

• Corner-blocked frame
• Attached back and loose seat cushions
• High-resiliency foam cushions wrapped in thick poly fiber
• Polyester upholstery
• 2 throw pillows included
• Pillows with soft polyfill
• Exposed feet with faux wood finish
• Body and One Side Toss Pillows: Polyester (100)%
• Oneside Toss Pillows: Polyester (100)%

AT A GLANCE

• 4 OHM Impedance
• 6.5" Upgraded OEM Replacement Component Speakers
• Injection Molded PP Cone
• Nylon OEM Speaker Adapter
• 3/4” Mylar Dome Tweeter
• Plug and Play Wiring Adapters

AT A GLANCE

• Gentle rocking motion
• Attached cushions
• High-resiliency foam cushions wrapped in thick poly fiber
• Corner-blocked frame with metal reinforced seat
• One-pull reclining motion
• Polyester upholstery
• Body: Polyester (100)%

AT A GLANCE

• 60 Watts RMS/120 Watts Max
• Injection Molded PP Cone
• 10 oz. Magnet
• Nylon OEM Speaker Adapter
• 1” Inverted Titanium Dome Tweeter
• Inline Crossovers
• Factory Plug and Play Wiring Adapters
• 4-ohm System Impedance

AT A GLANCE

• Corner-blocked frame
• Attached back and loose seat cushions
• High-resiliency foam cushions wrapped in thick poly fiber
• Polyester upholstery
• 2 throw pillows included
• Pillows with soft polyfill
• Exposed feet with faux wood finish
• Body and One Side Toss Pillows: Polyester (100)%
• Oneside Toss Pillows: Polyester (100)%

AT A GLANCE

• 4 OHM Impedance
• 6.5" Upgraded OEM Replacement Co-Axial Speakers
• 60 Watts RMS
• Injection Molded PP Cone
• Nylon OEM Speaker Adapter
• Plug and Play Wiring Adapters

AT A GLANCE

• Corner-blocked frame
• High-resiliency foam cushions wrapped in thick poly fiber
• Platform foundation system resists sagging 3x better than spring system after 20,000 testing cycles by providing more even support
• Smooth platform foundation maintains tight, wrinkle-free look without dips or sags that can occur over time with sinuous spring foundations
• 2 decorative pillows included
• Pillows with soft polyfill
• Exposed feet with faux wood finish
• Arm height: 27"
• Leg height: 2.25"
• Attached back
• Loose seat cushions
• 100% polyester

AT A GLANCE

• Made of engineered wood
• Rustic plank finish and replicated oak grain
• 2 storage cabinets (each with an adjustable shelf) and removable/adjustable center shelf
• Dark bronze-tone hardware
• Cutouts for wire management and ventilation
• Compatible with W100-02 and W100-101 LED fireplace inserts (sold separately)
• Assembly required

AT A GLANCE

• Includes 2 candle holders, tray and 2 vases
• Made of galvanized finished metal and natural wood
• Candle holder holds 3" pillar candles (candles not included)
• Clean with a soft, dry cloth
• Small Vase: 5.25" W x 9" H x 5.25" D
• Large Vase: 6" W x 11.50" H x 6" D
• Small Candle Holder: 4.50" W x 7" H x 4.50" D
• Large Candle Holder: 5.50" W x 8.25" H x 5.50" D
• Tray: 6" W x 2.75" H x 13" D

AT A GLANCE

• Classic Comfort with Modern Design
• Polyester Upholstery
• High-Quality Foam Cushion
• Corner-Blocked Frame

AT A GLANCE

• 6.5" Upgraded OEM Replacement Co-Axial Speakers
• 60 Watts RMS/120 Watts Max
• Injection Molded PP Cone
• Nylon OEM Speaker Adapter
• 1” Silk Dome Tweeter
• 10 oz. Magnet
• Factory Plug and Play Wiring Adapters
• 4-ohm System Impedance

AT A GLANCE

• 7-level temperature settings
• Multi flame system and 5 brightness levels
• LED flame operates with or without infrared heat
• Fireplace provides up to 5386 BTU/1500W and warms up to 1,000 square feet (heats larger rooms)
• LED glowing embers effect
• Remote control with LED display
• Programmable timer will turn off the unit after a set period of time
• UL Listed; power cord included
• Assembly required

AT A GLANCE

• 60 Watts RMS/120 Watts Max
• Injection Molded PP Cone
• 10 oz. Magnet
• Nylon OEM Speaker Adapter
• 1” Silk Dome Tweeter
• Inline Crossovers
• Factory Plug and Play Wiring Adapters
• 4-ohm System Impedance

AT A GLANCE

• 6 1/2" Upgraded OEM Replacement Co-Axial Speakers
• 60 Watts RMS/120 Watts Max
• Injection Molded PP Cone
• Nylon OEM Speaker Adapter
• 1” Silk Dome Tweeter
• 20 oz. Magnet
• Factory Plug and Play Wiring Adapters
• 4-ohm System Impedance

AT A GLANCE

• vehicle-specific component speaker system includes two woofers and two tweeters
• 6"x 9" molded polypropylene woofer cone
• 2-3/4" silk dome tweeter with inline crossover
• designed to fit in select GM and Chevrolet vehicles
• vehicle-specific installation gear and wiring adapters included
• works with factory radio, aftermarket stereo, or amplifier
• handles up to 80 watts RMS (160 watts peak)
• frequency response: 65-19,000 Hz
• impedance: 4 ohms
• sensitivity: 89 dB
• woofer mounting depth: 1-1/4"

AT A GLANCE

• Corner-blocked frame
• High-resiliency foam cushion wrapped in thick poly fiber
• Polyester upholstery
• Exposed feet with faux wood finish
• Body: Polyester (100)%

AT A GLANCE

• 6 x 9" Upgraded OEM Replacement Co-Axial Speakers
• 80 Watts RMS/160 Watts Max
• Injection Molded PP Cone
• Nylon OEM Speaker Adapter
• 1” Silk Dome Tweeter
• 20 oz. Magnet
• Factory Plug and Play Wiring Adapters
• 4-ohm System Impedance

AT A GLANCE

• Made of cotton and jute
• Clean with a soft, dry cloth
• Set of 2
• Large Basket: 13" W x 13" H x 13" D
• Small Basket: 11" W x 12" H x 11" D