AT A GLANCE

• Loose seat cushions
• Seats and back spring rails are cut from mixed hardwood and engineered lumber
• Stripes and patterns are match cut
• Cushions are constructed of low melt fiber wrapped over high quality foam

AT A GLANCE

• Loose seat cushions
• Seats and back spring rails are cut from mixed hardwood and engineered lumber
• Stripes and patterns are match cut
• Cushions are constructed of low melt fiber wrapped over high quality foam

AT A GLANCE

• Corner-blocked frame
• Attached back and loose seat cushions
• High-resiliency foam cushions wrapped in thick poly fiber
• Polyester upholstery
• 2 throw pillows included
• Pillows with soft polyfill
• Exposed feet with faux wood finish
• Body and One Side Toss Pillows: Polyester (100)%
• Oneside Toss Pillows: Polyester (100)%

AT A GLANCE

• Usb port retention cable
• For 2012-up Toyota and Lexus vehicles
• Retains the use of the OEM USB port when replacing the factory radio
• Simple installation

AT A GLANCE

• Gentle rocking motion
• Attached cushions
• High-resiliency foam cushions wrapped in thick poly fiber
• Corner-blocked frame with metal reinforced seat
• One-pull reclining motion
• Polyester upholstery
• Body: Polyester (100)%

AT A GLANCE

• Made of engineered wood
• Butcher block finish over replicated pine grain
• Pulls in gunmetal finish
• Center open storage area
• 2 side storage areas with cabinet doors
• 3 adjustable/removable shelves
• Cutouts for wire management
• Compatible with W100-101 and W100-02 electric fireplace inserts
• Assembly required

AT A GLANCE

• Corner-blocked frame
• Attached back and loose seat cushions
• High-resiliency foam cushions wrapped in thick poly fiber
• Polyester upholstery
• 2 throw pillows included
• Pillows with soft polyfill
• Exposed feet with faux wood finish
• Body and One Side Toss Pillows: Polyester (100)%
• Oneside Toss Pillows: Polyester (100)%

AT A GLANCE

• Corner-blocked frame
• Attached back and loose seat cushions
• High-resiliency foam cushions wrapped in thick poly fiber
• Platform foundation system resists sagging 3x better than spring system after 20,000 testing cycles by providing more even support
• Smooth platform foundation maintains tight, wrinkle-free look without dips or sags that can occur over time with sinuous spring foundations
• 4 decorative pillows included
• Pillows with soft polyfill
• Polyester upholstery and polyester pillows
• Exposed feet with faux wood finish
• Toss Pillows: Polyester (100)%
• Oneside Toss Pillows: Polyester (100)%
• Body and One Side Toss Pillows: Polyester (100)%

AT A GLANCE

• Corner-blocked frame
• High-resiliency foam cushions wrapped in thick poly fiber
• Platform foundation system resists sagging 3x better than spring system after 20,000 testing cycles by providing more even support
• Smooth platform foundation maintains tight, wrinkle-free look without dips or sags that can occur over time with sinuous spring foundations
• 2 decorative pillows included
• Pillows with soft polyfill
• Exposed feet with faux wood finish
• Arm height: 27"
• Leg height: 2.25"
• Attached back
• Loose seat cushions
• 100% polyester

AT A GLANCE

• Corner-blocked frame
• High-resiliency foam cushion wrapped in thick poly fiber
• Polyester upholstery
• Exposed feet with faux wood finish
• Body: Polyester (100)%

AT A GLANCE

• Universal Steering Wheel Control Interface
• Plug and Play installation
• Works with Nearly All Popular Aftermarket Receivers
• Provides Conguration Information for Dip Switch or Direct Flash from PC APP

AT A GLANCE

• Includes 2 candle holders, tray and 2 vases
• Made of galvanized finished metal and natural wood
• Candle holder holds 3" pillar candles (candles not included)
• Clean with a soft, dry cloth
• Small Vase: 5.25" W x 9" H x 5.25" D
• Large Vase: 6" W x 11.50" H x 6" D
• Small Candle Holder: 4.50" W x 7" H x 4.50" D
• Large Candle Holder: 5.50" W x 8.25" H x 5.50" D
• Tray: 6" W x 2.75" H x 13" D

AT A GLANCE

• Made of engineered wood
• Rustic plank finish and replicated oak grain
• 2 storage cabinets (each with an adjustable shelf) and removable/adjustable center shelf
• Dark bronze-tone hardware
• Cutouts for wire management and ventilation
• Compatible with W100-02 and W100-101 LED fireplace inserts (sold separately)
• Assembly required

AT A GLANCE

• Radio Replacement Interface for Select non-amplified Class II GM vehicles with 24-pin connector
• Retains all safety warning chimes when the factory radio is replaced
• Provides 10-minute RAP accessory output
• Interface can be quickly updated if needed from PAC website using PAC-UP USB adapter
• Retains all safety warning chimes when the factory radio is replaced
• Provides 10-minute rap accessory output
• 24-Pin connector

AT A GLANCE

• 7-level temperature settings
• Multi flame system and 5 brightness levels
• LED flame operates with or without infrared heat
• Fireplace provides up to 5386 BTU/1500W and warms up to 1,000 square feet (heats larger rooms)
• LED glowing embers effect
• Remote control with LED display
• Programmable timer will turn off the unit after a set period of time
• UL Listed; power cord included
• Assembly required

AT A GLANCE

• 8-Pin USB port retention cable
• For 2011-up Nissan cube, juke and versa vehicles
• Retains the use of the OEM USB port when replacing the factory radio
• Simple installation

AT A GLANCE

• Warning chimes through internal speaker
• Bose amplifier retention (Standard & Premium)
• SWI-DIRECT add-on steering wheel control interface connection
• Time saving streamlined harness design and small housing
• USB updatable

AT A GLANCE

• Radio Replacement Interface for Select 2005-up MSCAN-bus Ford, Lincoln and Mercury Vehicles
• Enables factory features such as rear seat entertainment, rear controls, and the THXII amp when the factory radio is replaced
• Provides RAP accessory power output, vehicle speed, illumination, reverse indication output and parking brake output signal to allow easy installation of an aftermarket NAV system
• Compatible with THX, SONY, Shaker and Audiophile sound systems in applicable vehicles. (v1.1.4 or higher required)

AT A GLANCE

• OnStar retention
• Steering wheel control retention
• Warning chime module included
• Bose amplifier retention (Standard and Premium)
• Rear-seat entertainment system retention (GMRVD required)
• Retains factory Bluetooth (2009+ model vehicles)
• In-field firmware updatable (PAC-UP required)
• Antenna Adapter included
• Factory USB port retention cable included
• Dual Zone function
• Retains back-up sensors/park assist and back up camera signal
• Retains rear seat audio controls
• Retains factory satellite radio with text displayed in the Driver Information Center (cluster display)

AT A GLANCE

• Retains steering wheel controls (pre-programmed)
• Data controlled accessory and navigation outputs
• Retains factory amplifier
• Factory RSE activation
• 12V ACC output (RAP)
• Vehicle Speed Sense (VSS)
• Illumination, reverse and parking brake outputs
• Antenna Adapter included
• Factory USB port retention cable included

AT A GLANCE

• Single wire output for steering wheel control module
• Retains all safety warning chimes
• Plug and play interface
• Made for GM Vehicles 2004 and Up w/out Onstar

AT A GLANCE

• Made of cotton and jute
• Clean with a soft, dry cloth
• Set of 2
• Large Basket: 13" W x 13" H x 13" D
• Small Basket: 11" W x 12" H x 11" D

AT A GLANCE

• Set of 2
• Braided black cotton and natural jute
• Handles for easy transport
• Organic storage baskets

AT A GLANCE

• Comfort level: firm
• 2" high-density quilt foam
• 13-gauge Bonnell coil unit
• High-density pad
• Foundation/box spring available, sold separately
• Mattress ships in a box; please allow 48 hours for your mattress to fully expand after opening